Basic Info.
Certification
GS, CE, RoHS, ISO 9001
Transport Package
Plywood Box
Product Description
High Precision! Used For Composite Board Processing Wood CNC Router Machine
Technical Details:
| Stroke range | X*Y*Z | 3000*12000*350mm |
| | Saw axis | 5 axis saw; A axis:0-90°; C axis:±360°; Infinite variable Angle |
| Effective working area | X*Y*Z | 3000*12000*250mm |
| Machine structure | Whole steel structure, segmented composite table, double bridge girder gantry structure, aging treatment |
| Work table | Vacuum worktable with Automatic adsorption positioning device |
| Control system | Brand model | Taiwan SYNTEC 11MB control system |
| | Control cabinet | Independent control cabinet |
| Spindle | Spindle brand | Taiwan mechanical water cooling spindle |
| | power/ speed | Spindle power 5.5KW, speed 0-10000rpm/min |
| | Tool holder | BT40 standard, hydraulic lock |
| | Tool magazine | Rotating-disk tool magazine, with 8 tools |
| Servo motor system | Brand | Japan YASKAWA servo motor and driver system |
| | Driver motor | X axis 1.8KW,Y axis 1.8KW,Z axis 1.3KW(with brake) |
| Reducer | X,Y,Z | Planetary reducer,XY axis:Taiwan PINHONG 1:10,Z axis:Taiwan PINHONG 1:3 |
| | A,C | Original imported precision reducer |
| Transmission mode | Imported square linear guide rail,XY precision rack gear drive,Z axis imported ball screw transmission |
| Feed speed | X axis≥35000mm/min Y axis≥35000mm/min Z axis≥9000mm/min |
| Position accuracy | ±0.1mm |
| Re-position accuracy | ±0.05mm |
| Working speed | Spindle cut speed:(0~8)m/min;saw blade cut speed:(0~5)m/min |
| | Spindle drilling hole:drilling hole(0~8)m/min,the next hole(0~25)m/min |
| Power ,voltage, air pressure | Whole machine power15KW voltage AC 380V/50HZ |
| air pressure>=6.5Kgf/cm² |
| Dust control system | Yes, moving type, anti-staticion wind rod dust removal system |
| Safety protection | Yes CE switch, protective cover, emergency stop switch and so on |
| Equipment lighting | Table lighting, work area clearly visible |
| Software | UG,mastercam,powermill,Artcam ect. |
| Machine Dimension | Wide*length*height:8000*15000*2500(mm) |
| Weight | About 20 tons |
Standard Features:
1. Adopt computer-aided design to achieve machine' optimum structural design. The overall steel structure, sub-modular bed, after aging treatment to eliminate internal stress, long-term use without deformation, after the import of five milling machine (3.3 * 8 m) deep processing, to ensure the late assembly parallelism and three Axis verticality, in order to ensure the stability of the bed structure, parallelism, straightness, the use of rail extension method for stitching, and the use of imported laser collimator calibration;
2. More stable bridge double girder gantry structure, divided into main and vice double beams, including the main beam bearing spindle, saw blade, knife library, sub-beam bearing electronic control system and vacuum components. To ensure that the machine in the Y-axis up to 10 meters under the big stroke signal transmission stability and processing stability. The main and auxiliary gates are welded with thick-walled square steel, strengthened with internal ribs, and then subjected to strict aging treatment to eliminate deformation stress and improve rigidity;
3. Five-axis linkage stepless variable angle design, can achieve any angle fast linear cutting, for the outer contour of the plate straight cutting and connecting slant fast cutting, can add the maximum diameter of 450mm blade, the maximum depth of 140mm;
4. Equipped with aerosol cooling method, according to the different processing materials to choose different cooling medium, can be used for the work piece and cutting tools, saw blade cooling, to avoid the traditional cooling caused by plate;
5. Vacuum adsorption table: the use of sub-grid format vacuum adsorption table, partition control, the table along the width (X axis) direction set the standard T-slot, using multiple vacuum pumps, with excellent adsorption capacity;
6. Pneumatic positioning tooling: set the X-axis and Y-axis positioning cylinder, depending on the travel size of different sizes;
7. Pneumatic lift rolling structure: the installation of pneumatic lifting platform on the table to facilitate the composite board from the front and rear ends of the material;
8. Equipped with high-level precision, high speed and high rigidity linear guide rails, excellent carry capacity under high load, good anti-wear properties;
Applications industry and material:
1. Industry: It applies to large panel production and processing, such as kinds of wood, fiberglass, FRP composition sheet, aluminum, hard plastic, acrylic, insulation materials and other large sheet, which are required on refrigerated compartments, insulation compartments,processing sun room, log cabin, RV, field barracks, quick housing etc;
2. Material: large panel plate is a laminate or sandwich structure, inside and outside the skin for the aluminum or glass steel plate, the internal buried plate can be 6mm stainless steel plate, carbon steel plate, the filler can be polyurethane foam, EPS foam or XPS foam, glass or aluminum outer surface is usually attached A layer of protective film;
Main Parts:
Samples:
Our Company:
FAQ
1. The first use of this machine, it is easy to operate?
---There are English manual or guide video that show how to use machine.If you still have any queation,we can talk from phone or whatsapp.
2. If machine has any problem after I ordered it,how could I do ?
---Free parts send to you in machine warranty period if machine have any problem.
3. Free after-sales service time for machines?
---Please feel free contact us if your machine have any problem,we will give you 24 hours service from phone ,skype and whatsapp.
4. Payment
---T/T (30% in advance, balance before delivery)
5. What information do you need to know if you need the machine?
---Please tell us what kind of material you processed and the size and thickness of the material,and please send me the finished picture for our reference.
Surviving by integrity, Developing by quality.
Address:
515 Rongxiang Business Building, Lashan Rd, Huaiyin District, Jinan, Shandong,China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Shandong PEF Machine tool Co., Ltd is one large High-Tech enterprise which specialized in designing, developing and producing various CNC machine and gantry machining centers. All the products have been approved by ISO9001: 2000 and CE, we achieve ERP strategy and have independent right to export and import. <br><br>Our factory in Qihe Economic Development Zone of Shandong Province, which with 13000 modern plant, have over 150 workers and 60 professional technician. In order to make all mechanical components with high process precision, we use exported USA HASS CNC Process Center, USA Leader Metrology Three Coordinates Testing Center, Taiwan AWEA Gantry CNC Center and other advanced machinery equipment, to ensure our processing manufacturing capabilities keep the absolute leading position in industry field. <br><br>Main products High-level Auto-tool Changer CNC Machinery Center, Simple ATC by Multi-workstage CNC Router, Standard Wide Application Woodworking CNC Router, 3D (Three-dimensional) Cylindrical Materials′s Carving and Milling CNC Router, 4 Axis and 5 Axis CNC Machine, Multi-head CNC Engraving Machine, Foam/EPS/Wood Molding CNC Machinery for Mould, CNC Router with Plasma Metal Cutting Function Machine etc...<br><br>Our products have been widely exported to over 40 countries and areas including Middle East, America and Europe, Southeast Asia, Africa, South America, Russia, etc. With stable reliable product quality, reasonable price and high quality service, we won the praise of customers at home and abroad.
){kind=link}